An all position rutile type flux cored wire for MAG/MIG welding.
CLASSIFICATION : AWS/SFA-5.20: E70T1
JIS YFW-C50DM
JIS YFW-C50DM
CHARACTERISTICS :
Flux-cored welding wire with rutile type slag base. Quite and smooth running characteristics, very low spatter loss, easy deslagging, weld seams uniformly shaped with smooth edges. Particularly suited for fillet welds.
APPLICATION :
Suitable for welding of structural’s and boilers, pressure vessel components made of steel with minimum UTS requirements up to 510 N/mm2.
SHIELDING GAS :
Welding with CO2 gas and Ar+ CO2 gas mixture.
CHEMICAL COMPOSITION % ( Weld wire chemistry under CO2 Gas)
| C | Mn | Si | S | P | Others |
| 0.060 | 1.55 | 0.55 | 0.030 Max | 0.030 Max | —- |
ALL WELD MECHANICAL PROPERTIES FOR MIG ( under CO2 GAS )
| YS (N/mm²) | UTS (N/mm²) | EL % | CHARPY “V” NOTCH IMPACT AT |
| 450-540 | 540-650 | 22-30 | 0°C : 60-80 J Minus 20°C : 40-60 J |
DIMENSION, CURRENT CONDITION & PACKING DATA
| Size(mm) | Size(inch) | Current Condition(DC+) | Voltage (V) | Gas Flow Rate L/min. | Spool packing 12.5 kg. | Spool packing 15 kg | Drum packing 100/200kg |
| 1.20 | 3/ 64” | 120-300 | 24-34 | 15-25 |  | | |
| 1.40 | 1/ 18” | 130-330 | 26-34 | 15-25 | | | |
| 1.60 | 1/ 16” | 150-350 | 28-36 | 15-30 | | | |
Raajratna offer a wide range of Flux-cored welding wires for MIG welding.