Welding Electrodes :
STANDARD SIZES
| Size in mm | 2.00 | 2.40 / 2.50 | 3.15/3.20 | 4.00 | 5.00 |
| Size in inch | 5/64 | 3/32 | 1/8 | 5/32 | 3/16 |
- 1.60mm or Customized size also available on request.
- All electrodes are available in 350-450mm length
STANDARD PACKING
| Commodity | Inner Pack | Master Box (Kgs.) Corrugated |
| Mile Steel Electrodes | 5.00 KG / 10 Lbs Corrugared | 20.00 kg / 40 lbs |
| Stainless Steel, Nickel & Special Electrodes | 5.00 KG / 10 Lbs Plastic | 20.00 kg / 40 Lbs |
| 2.00 KG / 5 Lbs Plastic | 10.00 kg / 25 Lbs |
- Vacuum pack is available on request
- Packing in pieces also available on request
- Customized packing available on request
- CAN/TIN pack also available on request
Copper Coated / Stainless Steel MIG Welding Wire :
| Diameterin mm | Diameter in inch | Plastic Spools | Metal Baskets | |
| D-300/D-270 | D-200 | K-300 | ||
| 0.60 | 0.023 | 12.5 & 15 Kgs | 5 Kgs | 12.5 & 15 Kgs |
| 0.80 | 0.030 | |||
| 0.90 | 0.035 | |||
| 1.00 | 0.040 | 33 Lbs/ 44 Lbs | 10 Lbs/ 11 Lbs | 33 Lbs/ 44 Lbs |
| 1.20 | 0.047 | |||
| 1.60 | 0.062 | |||
Identification
- Each spool and carton is labeled with type (grade), size, quantity and batch/lot number.
Copper Coated / Stainless Steel TIG Welding Wire / Filler Rod :
| Dia. in mm | 1.20 | 1.60 | 2.00 | 2.40 / 2.50 | 3.20 | 4.00 |
| Dia. in inch | 3/62″ | 1/16″ | 5/64″ | 3/32″ | 1/8″ | 5/32″ |
Length
Available in 1000 mm/39″ or 36″ standard length.
Identification
Each wire is embossed at one or both ends with grade & size and labeled on packages with type (grade), size, quantity & batch /lot number.
Packing
5 Kgs / 10 Lbs wire primarily packed in plastic/corrugated
tube further packed in card board box.
DRUM PAC for Copper Coated / Stainless Steel Welding Wire Advantages :
- Robotic Application
- Cost Efficiency
- Un-Interrupted Feeding
- Control on Wastage
- Parts Life
- Drum Material
- Dust Free Packaging
- Safe Transportation
| Wire Dia. in mm | Net Weight in Kgs. | Dimension of Drum Outer Dia. x Height in inch | Drum Type |
| 1.00/1.20/1.60 | 100 | Dia 20” x Height 16” or 17” | Small Drum |
| 1.00/1.20/1.60 | 250 | Dia 20” x Height 32” | Large Drum |
Flux Cored Arc Welding Wire :
| Diameter in mm | Diameter in inch | Plastic Spools | Metal Baskets | |
| D-300/D-270 | D-200 | K-300 | ||
| 1.20 | 0.047 | 12.5 & 15 Kgs | 5 Kgs | 12.5 & 15 Kgs |
| 1.40 | 0.055 | |||
| 1.60 | 0.062 | 33 Lbs / 44 Lbs | 10 Lbs / 11 Lbs | 33 Lbs / 44 Lbs |
Identification
- Each spool and carton is labeled with type (grade), size, quantity and batch / lot number. Also supply drum pac in 100 Kgs. & 250 Kgs.
SAW Wire and Fluxes :
| Dia. in mm | 1.60 | 2.00 | 2.40 | 3.20 | 4.00 |
| Dia. in inch | 1/16″ | 5/64″ | 3/32″ | 1/8″ | 5/32″ |
Identification
- Coils are identified with label showing type (grade). size, quantity and batch I lot number.
Saw Wire Packing
Ring Pack : 25 Kgs/ 60 Lbs precision layerwounding
Steel Bobbin : 300-400 Kgs bulk packing.
Drum Pack : 500- 750 Kgs M.S. or Corrugated Drum Packing.
Saw Flux Packing
Polythene lined bags of 25 Kgs. or Steel Drum of 250 Kgs.
RE-DRYING :
| Commodity | Re-Drying Temp. °C | Holding Time | Holding Temp. °C |
| Rutile & Cellulosic Electrode (Can be used directly but if any sign of moisture better to re-dry) |
90 – 100 | 0.5 Hour | RT |
| Basic coated & LH Type Electrode | 300 – 350 | 1.0 Hour | 100 |
| SS & Nickel base Electrode | 250 – 300 | 0.5 Hour | 100 |
| Cast Iron Electrode | 100 – 150 | 0.5 Hour | 60 |
| Vacuum Pack Electrode | Use Directly | – | As Storage |
| SAW FLUX | 300 – 350 | 2.0 Hour | 100 |
- The above data are for optimum results and it is only a broad guideline
STORAGE - GENERAL GUIDELINES
- First-in / First-out (FIFO)
- Electrodes should be kept in dry area
- Maintain the storage temperature -15-30°C
- Relative humidity to be controlled as low as possible preferable below 50%
- Boxes of electrodes should be placed on pallet or on shelf rather than on ground
- The vacuum packed electrodes must be stored in closed packs in dry zone
- Ready for Dispatch
Plywood Pallet
Euro Pallet
Container Stuffing
